81
#41
The function is reserved
#42
The function is reserved
#43
Off Duty Greeting Record
0
#44
The function is reserved
#45
The function is reserved
#46
The function is reserved
#47
The function is reserved
#48
The function is reserved
#49
On Duty Greeting Record
0
#50
The function is reserved
#51
The function is reserved
#52
The function is reserved
#53
The function is reserved
Introduction of the System Command
The detail explain about the command (You have to add system’s password behind the command to
finish the setting)
Dial
＃
30
：
Password Changing(4 digit)
Hint
You can assign a password for IPX system by dialing “#30XXXX”. The voice will ask you to
enter 4-digit number to change the factory value of the system.
Dial
＃
33
：
Reset(S
：
0=reset the password to ‘0000’
；
S
：
1=clear the data and setting of the
extension)
Hint
The command “#33XXXX” is used to clear the data like recording and voice mail on your
extension. There are two selections. “0” is changing the extension’s password to the default
value “0000”, but keep the data and setting on the extension. “1” is not only change the
password to default value “0000” but all information will be changed to factory value that
include recording and voice mail.
Dial
＃
43
：
Record/Review Off-Duty System Greeting Message
Hint
Maximum recording time is 50 seconds. When you are finished, carefully hang up the phone
in order to minimize the noise at the end. To review the off-duty system-greeting message,
enter “#43” alone without the system password. The message will be played after about 2
Summary of Contents for IPX-1500
Page 1: ...Internet Telephony PBX System IPX 1500 User s manual 1 ...
Page 25: ...IPX 1500 main page 25 ...
Page 37: ...37 ...
