PLANET Mesh Network Manager Guide
The default value for Scan-IP:
4.2.3.10 Socket Port
The notification of an AP node is sent according to its
NMS Address Table
Community:
public
Username:
snmpv3rouser
Password:
snmpv3password
Passphrase: snmpv3passphrase
. The table defines
et
order to update the socket port, select
Settings > Socket Port
from the menu bar. A dialog
the IP Address and port number of the destination (NMS). For instance, if the admin has
added a table entry with port number 8000 at the AP, the NMS user can change the sock
port number to 8000 in order to receive the notification.
In
box would appear on the screen to prompt for the port number, which range from 1 to 65535.
Hit
OK
to confirm the change.
4.2.3.11 SNMP Community / Passwords (for AP Unit)
In case if a Mesh AP utilizes a different community or passwords from the others, the NMS
might fail to read the topology from it. Hence, user might need to edit the individual AP unit
SNMP keys, by right-click the desired active node. Select
Change v2c Community
from the
popup menu to change the community; or click
Change v3 Passwords
to change the v3
keys; enter the correct value in the dialog box and click
Change and Use SNMP Version X
.
PLANET Mesh Network Manager Guide
Page28 of 124
