background image

 

 

- 13 - 

3.  WEB SMART MEDIA CONVERTER CHASSIS MANAGEMENT 

This chapter describes how to manage the Web Smart Media Converter Chassis. Topics include: 

- Overview  

- Management methods  

- Assigning an IP address to the Web Smart Media Converter Chassis  

- Logging on to the Web Smart Media Converter Chassis  
 

3.1 Overview 

The Web Smart Media Converter Chassis provides a user-friendly, command line under console interface. Using this in-
terface, you can perform various Web Smart Media Converter Chassis configuration and management activities, including: 

Command 

Description 

Show system 

Show software version, Mac address and IP address of Web Smart Media Converter Chassis.

Show IP 

Show current IP subnet address of Web Smart Media Converter Chassis. 

Show power 

Show current power supply unit status of Web Smart Media Converter Chassis. 

Show slot [n] 

Show current per slot status of Web Smart Media Converter Chassis with FST-8 / GST-7 Media 

Converter boards. 

Show redundant [n] 

Show per redundant group status of Web Smart Media Converter Chassis. 

Set slot [n] 

Configure per slot setting of Web Smart Media Converter Chassis with various Media Con-

verter boards. 

Set redundant [n] disable / 

enable 

Disable or enable per redundant group of Web Smart Media Converter Chassis. 

Set IP xxx.xxx.xxx.xxx, 

mmm. mmm, mmm, mmm, 

ggg.ggg.ggg.ggg 

Assign IP address, subnet mask, and gateway of Web Smart Media Converter Chassis. 

Set Pass [oldpass] [ new-

pass] 

Change the default password of Web Smart Media Converter Chassis, the maximum length is 

8 characters. 

Factory Default 

Reset the Web Smart Media Converter Chassis to factory default mode. 

Reboot 

Reboot the Web Smart Media Converter Chassis. 

Logout 

Logout console interface of Web Smart Media Converter Chassis. 

Please refer to the following Chapter 4 and 5 for the details. 

3.2 Management Methods 

There are two ways to manage the Web Smart Media Converter Chassis: 

- Local Console Management via the serial port of Web Smart Media Converter Chassis. 

- Web Management via a network or dial-up connection. 

3.2.1 Local Console Management 

You can manage the Web Smart Media Converter Chassis locally by connecting a VT100 terminal, or a personal computer 
or workstation with terminal emulation software, to the serial port of Web Smart Media Converter Chassis. The terminal or 
workstation connects to the serial port of Web Smart Media Converter Chassis. using a null modem cable that has the 
appropriate connectors on each end. 

This management method is ideal when: 

- The network is unreliable. 

- The Network Manager does not have direct network connection. 

 

Summary of Contents for MC-1600MR




















































Reviews: