PLANET NAS-7400 User Manual
144
Connection Problems after Restart
If your NAS-7400’s network settings were set to Obtain an IP address
automatically, your DHCP server might assign a different IP address to the
NAS-7400 when you restart the NAS-7400 after is was shutdown for repairs.
This condition does not apply if you assigned your NAS-7400’s IP address
manually.
If you experience network drive or printer connection failures, check the
NAS-7400’s current IP address. If the NAS-7400’s IP address has changed,
your previous network drives and printer connections will no longer work.
Here are two possible solutions:
You may be able to reset the NAS-7400’s IP address manually. Note
that changing the NAS-7400’s IP address may cause an IP address
conflict on your network. Check with your Network Administrator
before taking this action.
If you cannot restore the previous IP address, you must create new
network drives and printer connections.
Power Button
System
Status
