Configuring an SMTP server
1. Enter the hostname or the IP address of the SMTP server.
2. Enter the port of the SMTP server.
3. Specify the sender’s name in the “Sender’s name” field.
4. Enter the sender’s e-mail address.
5. Check “Enable Authentication” and enter the username and password of the
SMTP server and it requires authentication.
6. Click “Apply” to save the configuration.
6.3.4 E
W
t will be triggered and which servers will
the previous two sections, now we can finish up
ent trigger function enabled.
.Where the warnings will be sent to and how they will be sent.
vent Triggers
e have finished defining how an even
be receiving notifications in
the event configuration by setting.
.which channels will have ev
.What is considered to be an event.
