9-Channel Network Video Recorder
NVR-915
24
Auto setting could insert Intranet’s cameras even these cameras are located behind several
switch hubs. Besides, you could directly insert cameras on NVR’s switch hub and then click
“ Auto Setting “ button to add them to system. Through “ Auto Setting “ function , you do not
need to key-in any network IP address or sub-mask parameter. All you need to do is click
“ Auto Setting “ button to finish the job of inserting IP camera.
5.1.2 Template Setting
When you use “Auto Setting” or add a new camera, system will read the camera template from
“Template Setting” to fill out the camera parameter.
After the template has been confirmed, you will no longer need to set up parameter of camera
again in most cases. You could set up the quick template from camera setting page and only
need to set the camera’s resolution and frames per second. If you need to set up more details
in template, please click the “Advanced” button to approach the template setting dialog.
Resolution:
The new camera will try to fit the selected resolution. When you select “Max”,
the camera will adopt maximum resolution. If you select another resolution, the system will
choose a resolution for the camera.
FPS:
Set up frames per second for camera; system will try to set a near or equal FPS to
camera.
Rate Control:
Set up the rate control algorithm of new camera.
Quality:
If you select EVBR for new cameras, you could set up the then VBR quality here.
Account:
Set up the default login user account of camera.
Password:
Set up the default login password of camera.
