9-Channel Network Video Recorder
NVR-915
15
Chapter 3. Connecting to the NVR
There are various ways you can connect to the NVR and below are the suggested methods
for different network setups:
The NVR is placed in a network with a DHCP server: Connect to the NVR by using
“PLANET IP Wizard II”
Utility.
The NVR is placed in a network without DHCP server (or you are connecting to it directly):
Access NVR with its default IP (192.168.0.20).
3.1 Use Device Search Utility
If the NVR is placed in a corporate network or a local area network where a DHCP server is
already presented, please install the “PLANET IP Wizard II” utility from the bundled CD disk.
To begin, launch the “PLANET IP Wizard II” utility from the CD and proceed with the
installation.
