Planet UNC-NMS, Quick Installation Manual

10

5. Deployed Devices Monitored via UNC-NMS Controller

The UNC-NMS can monitor all the deployed wired or wireless NMS-500/NMS-1000V 
agent level network devices, and it also can monitor the devices under the NMS 
agents, such as managed switches, media converters, routers, smart APs, VoIP 
phones, IP cameras, etc. compliant with the SNMP Protocol, ONVIF Protocol and 
PLANET Smart Discovery utility.

Please regularly check PLANET website for the latest compatibility list of 
managed devices.

Follow the steps below to set up the UNC-NMS server and NMS-500/NMS-1000V 
agent devices.

Step 1:

  Connect the devices, UNC-NMS Controller and your computer to the same 

network. The NMS agent devices can set up in the other sub-net network 
environment.

Managed PoE Switch

10.1.20.X

Managed AP

IP Camera

PoE

PoE

NMS-1000V

10.1.20.X

NMS-500

or

UNC-NMS

Default: 192.168.1.100

Step 2:

 In UNC-NMS system, add a new site with NMS agent devices, such as 

NMS-500  and  NMS-1000V  and  then  create  a  certificate  file  import  in  to 

the NMS agent devices. It may need to build a VPN tunnel between UNC-
NMS and NNS-500/NMS-1000V when the connection will go through the 
internet.

Note

The NMS-500 and NMS-1000V FW version must be v1.0b220503 
for the above setup.