1
n
Finishing the Wizard Setup
After completing the Wizard Setup, please click “Finish” bottom. The VoIP gateway
will save the configuration and rebooting gateway automatically. After 20 Seconds,
you could re-login the gateway.
Voice communication samples
The chapter shows you the concept and command to help you configure your VoIP
gateway through sample configuration. And provide several ways to make calls
to desired destination in VIP-GW. In this section, we’ll lead you step by step to
establish your first voice communication via web browsers operations.
Concepts: Voice Port
There are two type of the voice port, FXO (Foreign exchange Office) and FXS.
(Foreign exchange Station) On the printing of the RJ-11 port, you should find that.
FXO port
The FXO port allows the connection with a device that already has a fixed number;
say 222, or 412-1111. So the only connections for FXO port will be to your local
PSTN or one of your extension-line from your PBX system.
With your FXO connect to PSTN; the Internet Voice can then have a local call
through this line/number (412-1111). Or, locally, you can have an Internet Call
through the line 412-1111
The same to PBX system, you are required to know with which extension number
to the FXO port. Your PBX users will need to know this number in the future.
PSTN
412-1111
222
FXO
412-1111
222
FXS
WAN
Gateway#1
Gateway#2
100
100
Phone
Phone
8100
9100
Gateway#1
Gateway#2
901
801
Phone
Phone
801
901
Registration /
Authentication
Registration /
Authentication
WAN
SIP IP PBX (172.16.0.3)
IPX-300
Hint
FXO port cannot connect to an end-node like telephone or fax
machine (since they do not provide a number!). If you connect
those to FXO port, you will hear nothing once you pick up the
handset.
