VIP-2100 User
’
s manual
- 135 -
session target sip-server
fax rate 14400
fax protocol t38 ls-redundancy 1 hs-redundancy 1 fallback cisco
sip-ua
line con 0
speed 115200
line aux 0
line vty 0 4
Q9. VIP-2100 cannot register to Cisco gatekeeper.
Answer:
a. Make sure GK IP and port number is correct.
b. If the gatekeeper can only allow predefined endpoint, make sure VIP-
2100 has it defined.
c. If you need prefix support, set it on GK.
Q10. External Radius server does not work.
Answer:
a. Make sure
“
VoIP Authentication method
”
is set to
“
external AAA
”
.
b. Make sure
“
AAA
”
component is used in the call flow editor to take
effect.
c. Make sure Radius server IP and port for authentication & billing are
correct.
Q11. Internal Radius server does not work.
Answer:
a. Make sure
“
VoIP Authentication method
”
is set to
“
internal AAA
”
.
b. Make sure
“
AAA
”
component is used in the call flow editor to take
effect.
c. Make sure only debit user is used for VoIP caller.
Q12. PSTN hunting Group does not work.
Answer:
a. Make sure
“
PSTN hunting Group
”
component is used in the call flow
editor to take effect.
b. Make sure
“
prefix
”
is met your target dialed number.
Summary of Contents for VIP-2100
