VIP-2100 User
’
s manual
- 18 -
Interface Configuration
This section is going to setup the VoIP interface.
Step 1:
Now we are going to setup the VoIP interface, click
Configuration
→
Interface
to setup VoIP T1/E1 interface as figure 3.1-1.
Figure 3.1-1
Step 2:
Double-click the installed interface (i.e Interface ID:0) to config it as
figure 3.1-2.
Figure 3.1-2
Step 3:
Modify the VoIP Interface parameters (i.e. IP Address, Protocol Tag,
Subnet Mask and Default gateway) and apply the change by clicking
Apply
as figure 3.1-3.
Figure 3.1-3
Summary of Contents for VIP-2100
