VIP-2100 User
’
s manual
- 91 -
Chapter 10 Telnet & RS-232 Configuration
VIP-2100 also can support to be managed by Telnet or Console port
(RS-232) for basic operations.
Interface:
v
Network: TCP/IP Telnet
v
RS232:
-
Connect using: COM1
-
Baud Rate: 9600
-
Data bits: 8
-
Parity: None
-
Stop bits: 1
-
Flow Control: None
-
Wire: Null modem line (crossed)
Logon VIP-2100 by Telnet
Use Windows build-in Hyper Terminal or other telnet terminal emulator
to login (e.g. telnet 192.168.111.111:10086). User ID & password will be
required for login (default login user id: admin, password: admin & user id:
root, password: root).
Command List:
Command
Description
echo
Auto echo on or off
eventlog
Clean or show system log message
exit
Quit the current session
ipconfig
Configure or show network information
ping
Check an IP address is available or not
reboot
Reboot
reset
Soft-reset
shutdown
Shutdown
time
Reset or show system time.
timezone
Setup or show system timezone
useradmin
Manage user account.
help & ?
View command list
Echo: auto echo on or not
Command
Purpose
[root#]echo ?
Usage: echo on/off
Example: echo on
[root#]echo on
Echo is on
[root#]echo off
Echo is off (default ralue)
Summary of Contents for VIP-2100
