Hot Line Setting
You can set hot line. When the call incoming the hot line port, it will call hot line number automatically.
The hot line calls the number via VoIP, so you setting the hot line number must VoIP number. Usually,
you want to incoming GSM calls transfer to FXS, you only setting the GSM hot line to FXS number.
Port number:
Input FXS/GSM wants to call hot line number. The call will via VoIP, so the number must
be the VoIP number.
Figure 5-25. Hot line setting
Port Status
Each of port show status table. You can view all port status. Like on/off hook, caller/callee IP, duration,
and packet loss.
Port Status Display
: This selection will display concurrent call status of this gateway. The status
information of each voice channel includes codec, dialing number and destination IP address. The
status is refreshed every 3 seconds.
Figure 5-26. Port status
40
