Figure 6-2. Save setting
Access Control
Changing the Administrator/Guest Password
For security reasons, we strongly recommend that you set an administrator/password for the router. On
first setup the router requires no password. If you don’t set a password the router is open and can be
logged into and settings changed by any user from the local network or the Internet.
Click
Access Control Setup
, the following screen will open.
Administrator username/password:
admin/123
Guest username/password:
guest/guest
Figure 6-3. Access control setting
Set To Default Configuration
If you want to reboot the router using
factory default configuration
, click “
Apply
” then reset the
router’ s settings to default values.
Figure 6-4. Set to default setting
42
