Í
Note
Please locate your PC in the same network segment
(172.16.0.x) of VIP-281GS. If you’re not familiar with
TCP/IP, please refer to related chapter on user’s manual
CD or consult your network administrator for proper network
configurations.
WAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default:
172.16.0.1
) of VIP in the adddress bar.
After logging on machine with username/password (default:
admin
/
123
), browse to “
WAN Setting
”
configuration menu, you will see the configuration screen below:
Figure 2-2. WAN port configuration
Connection Type
Data required.
Static IP
The ISP will assign IP Address, and related information.
DHCP
Get WAN IP Address automatically; it is no need to
configure the DHCP settings.
PPPoE
The ISP will assign PPPoE username / password for
Internet access,
Table 2-1. WAN port configuration descriptions
Please consult your ISP personnel to obtain proper PPPoE/IP
address related information, and input carefully.
If Internet connection cannot be established, please check
the physical connection or contact the ISP service staff
for support information.
L
Hint
11