NAT Pass Setting
NAT Pass Method
Default use Symmetric RTP pass function.
STUN Client
Setting your STUN server information, default STUN server is
FWD STUN server.
Outbound Proxy
Support
Setting your Outbound Proxy server information.
Local SIP Port
Setting local use SIP port, default is 5060.
Table 5-13. SIP proxy descriptions
Dialing Plan to SIP protocol
The “
Dialing plan
” needs setting when the user uses the method of Peer-to-Peer or registering SIP
proxy server mode. The SIP dialing plan has two kinds of directions: Outgoing (call out) and incoming
(call in).
Outgoing Dial Plan
Peer-to-Peer call mode: Effective
Registering to SIP Proxy Server Mode: Effective
Incoming Dial Plan
Peer-to-Peer call mode: Effective
Registering to SIP proxy server mode: The leading number would
register
to SIP proxy server
Table 5-14. Dialing plan descriptions
Figure 5-20. Outgoing dial plan setting
In the “Outgoing Dial Plan Configurations” settings: Maximum Entries : 50
Outbound number
The leading digits of the call out dialing number.
Length of Number
It has two text fields need filled: “Min Length” and “Max Length” is
the min/max allowed length you can dial.
Delete Length
The number of digits that will be stripped from beginning of the
dialed number.
Prefix no.
The digits that will be added to the beginning of the dialed number.
36