Step 2. Turn on the handset then hold the
“0”
key immediately before the handset shows "
Searching
".
The display will show "
Reset PIN?
” press the
right soft key
to confirm. After "
Saved!
" shows
on the LCD display, the PIN is reset successfully.
Base Selection
Your handset can be used with up to 4 base units, provided that it has been previously registered with
them. This menu option allows you to select the base you want to use:
Step 1. Entered to the
MENU >
H/Set Setting
item.
Step 2. Press the
Up
or
Down
key to choose
Select Base
, then press the
SELECT
key.
Step 3. Press the
Up
or
Down
key to select the base you want, then press the
SELECT
key. The icon
will appear at the right of the selected base.
Step 4. Press the key to return to Standby mode.
Resetting the Handset
If you reset the handset, all the user selectable features restore to the factory preset initial settings, all
the numbers in phonebook will be erased, as well as the incoming/outgoing call lists etc. But the
following are not reset:
Flash time, Key tone, Handset PIN, contrast, Window style, Language
If you have made many wrong settings and you want to restore the handset to the factory preset initial
settings.
Step 1. Entered to the
MENU >
H/Set Setting
item.
Step 2. Press the
Up
or
Down
key to choose
Handset Reset
.
Step 3. The handset asks you to enter the current handset PIN code (the default PIN is
1590
). Use the
numeric keys to enter and press
SELECT
key, then the display shows "
Reset?
” press the
SELECT
key to confirm.
Step 4. Press the key to exit.
1.
The icon will appear at the right of the selected base.
2.
If the selected base has not been registered with your handset,
the display will show "NOT SUB x" (The x is the base number 1 - 4).
3.
At select base, you can select "Best Base". It will automatically
find the first available unit when you lose contact while moving
around.
Í
Note
