18
19
Warm Start trap:
to set the trap when the device had been reset (default = enable).
Authentication Fail Trap:
to set the warning trap when the community name of the
device and workstation are different (default = enable).
Power Fail Trap:
to set the Power Fail Trap (default = enable).
Fan Fail Trap:
to set the Fan fail trap (default = enable).
MC Plug-in Trap:
to set the trap when a Media Converter Module has been plugged in
(default = enable).
MC Pullout Trap:
to set the trap when the Media Converter Module has been pulled out
(default = enable).
MC Broken trap:
to set the trap when the Media Converter Module was broken (default
= enable).
MC Link up trap:
to set the trap when a linking is connected (default = enable).
MC Link down trap:
to set the trap when a linking is disconnected (default = enable).
MC Active Slot Xchg trap:
to set the trap when there is a redundant function activated
(default = enable).
MC Active Slot Lose trap:
to set the trap when the redundant function is fail (default
= enable).
4.2.2.4 Location Setting
Assign each slot’s location or name in order to remember in where each slot was
connected.
