4
5
2.3.1 Mounted to 19-inch standard rack
Use the rack-mount brackets and screws to install the chassis into any EIA 19" standard
rack.
Step 1: Attach the brackets to each side of the chassis. Apply four screws to each side
and secure them tightly.
Step 2:
Carefully position the chassis into the rack. Align the brackets to the side
holes on the rack and use rack screws to secure the chassis with the rack.
Step 3:
Proceed to the “Connecting to Power” section.
2.3.2 Installing Media Converter
The chassis is equipped with sixteen media converter carriers, each of which is fitted into
bays of the chassis.
Step 1:
To install a media converter module onto the chassis, you have to unscrew the
bay cover from the desired bay first.
Step 2:
Unscrew the hand screw counter clockwise by using hand or screwdriver and
pull out the media converter out the carrier as shown below.
Unscrew the hand screw counter clockwise by
using hand or screwdriver and pull the media
converter module out on the carrier
