User Manual of WNAP-6315
-54-
Default Setting: "Disabled"
Multicast to Unicast:
Enables multicast traffic streams to be converted to unicast traffic
before delivery to wireless clients. Converting multicast traffic to unicast
before sending to wireless clients allows a longer DTIM (Data Beacon
Rate) interval to be set. A longer DTIM interval prevents clients in
power-save mode having to activate their radios to receive the multicast
data, which reduce power consumption.
Default Setting: “Enabled”
RF Output Power
Users can adjust the wireless output power to different levels. For
short distance of PtP connection within 1Km, it is suggested to reduce
the output power to 50% or lower to prevent interference with each
other.
Default is “100%”.
5.4.3 Security
Choose menu “
Wireless
Security
” to configure the settings of wireless security for the wireless network on
this page. After the configuration, please click the “Apply Changes” button to save the settings.
Figure 5-36
Wireless Security Settings
The page includes the following fields:
Object
Description
Select SSID
Select the SSID you want to configure the wireless security function, which
includes the root one and the client one.
Encryption
Disable:
No security setup for wireless connection.
