Radius Server
IP Address:
Enter the IP address of Radius Server.
Port:
The default port of the RADIUS server for authentication is 1812. You need not change this
value unless your network administrator instructs you to do so with additional information.
Shared Secret:
Enter a password as the key to be shared between the external authentication
server and the access point. The key is not send over the network. This key must be the same on
the external authentication server and your router.
Session Timeout:
Set the time interval for session. Enter the proper value in the field.
Idle Timeout:
Set the idle time interval. Enter the proper value in the field.
Access Policy
Policy:
There are three options, including Disable, Allow, and Reject. You can choose Disable,
Allow or Reject. Select Allow, only the clients whose MAC address is listed can access the router.
Select Reject, the clients whose MAC address is listed are denied to access the router.
Add a station MAC:
If you want to add a station MAC, enter the MAC address of the wireless
station that are allowed or denied access to your router in this address field.
After finishing the settings above, click
Apply
to save the settings and make the new configuration take
effect. Click
Cancel
to close without saving.
4.4 WPS
You can enable or disable the WPS function in this page.
Select
Enable
in the WPS drop-down list. Click
Apply
and the following page appear.
31
