User’s Manual
WSG-500 Wireless Hotspot Gateway
ENGLISH
111
12.3
Roaming Out
Configure local user Roaming Out, go to:
Users >> Authentication,
click
configure
of
Local
.
Under certain configurations, WSG-500 can act as a RADIUS server for Roaming Out local user logged
from other system. The Local User database will act as the RADIUS user database.
y
Account Roaming Out & 802.1X Authentication:
When Account Roaming Out is enabled;
the link of
Roaming Out & 802.1X Client Device Settings
will be available to define the client
device authorized to roam by entering the IP address, Subnet Mask, and Secret Key.
Click the hyperlink
Roaming Out & 802.1x Client Device Settings
to enter the
Roaming Out
& 802.1X Client Device Settings
interface. Choose
Roaming Out
and key in the Roaming Out
client’s IP address and network mask and then click
Apply
to complete the settings.
In the other system, such as another WSG-500, setup it’s RADIUS server to this WSG-500 with
same postfix, then the local user in this WSG-500 can login success from another WSG-500 by
RADIUS authentication.
Summary of Contents for WSG-500
