130
If the amount of traffics is larger than 4 GB, the attributes of “XXXX-4GB” will be used. For
example, if the amount is 5 GB, the following settings should be set: “WSG-500-Byte-Amount =
1048576” and “WSG-500-Byte-Amount-4GB = 1”.
On the other hand, when the administrator fills in all attributes, the user will be kicked out from
system if any condition is reached. For example, if the administrator sets
“WSG-500-Byte-Amount = 1048576”; “WSG-500 - MaxByteIn = 1048576” and “WSG-500-
MaxByteOut = 1048576”, the user will be kicked out from system when the downlink, uplink, or
total traffic exceeds the limit.
2.
VSA configuration in RADIUS server (IAS Server)
This section will guide you through a VSA configuration in your external RADIUS server. Before
getting started, please access your external RADIUS server’s desktop directly or remotely from
other PC.
Step 1
Confirm the following key elements in RADIUS server: users, groups, and policies.
♦
Verify whether there are already
users
in RADIUS Server.
♦
Verify whether there are already
Groups
and assigned
users
belonging to these
Groups
in RADIUS Server.
♦
Verify whether there are already
Policies
and assigned
Groups
belonging to these
Policies
in RADIUS Server.
Step 2
Run “Internet Authentication Server” and open “Remote Access Policies”
Select a
Policy
with right click and scroll down to its
Properties
page
Summary of Contents for WSG-500
