2
7
Chapter 2 Basic Setup & Configuration
œ
Linux / Unix-Like
1.At first please make sure that your NIC are already enabled and works
properly.
2.And be sure you have
ņ
root
Ň
number or your already are one of the
members of a
ņ
root
Ň
group.
3.Please type
ņ
ifconfig
Ň
of
ņ
ifconfig -a
Ň
after
ņ
#
Ň
and then press enter.
4.It will appear your present NIC address in the window, please take notice
of the value of
ņ
IP Address
Ň
and
ņ
Gateway.
Ň
5.The value of
ņ
Gateway
Ň
is the IP address of Mini-101U.
If you can get
ņ
IP Address
Ň
and
ņ
Gateway,
Ň
normally, it means that
you may use web browser to configure Mini-101U. Type your destination
ęņ
http://192.168.1.200
Ň
(default IP Address of Mini-101U) on the
Address Bar in the web browser. If you have changed the default IP
Address of Mini-101U, please type in the new address on the address bar.
1.1.Administrator Installation
The installation wizard will install the following programs:
Ŝ
Install all the necessary utilities and drivers
Ŝ
Guide you through the print server setup process to install and configure
your print server (including setting up several protocols and settings)
Ŝ
Add a new print server network port on your computer.
In order to let you make a connection successfully between Mini-101U
Print Server and your network/computer, we suggest that you should assign
a static IP address for your computer, for example, 192.168.1.100 (Mini-
101U Print Server's default IP address is
192.168.1.200
) that will help
while setting up the connection. After giving an IP address, please follow
the steps below to start the Installation:
Summary of Contents for Mini-101U
Page 1: ......
Page 2: ...Mini 101U 10M 100Mbps USB2 0 Print Server Mini 101U ...
Page 25: ...2 19 Chapter 2 Basic Setup Configuration ...
Page 97: ......