Planex URS-02, User Manual

URS-02

18

17

How to Attach URS-02 to a WindowsCE device

This section describes how to connect a Windows CE computer to a PC via

URS-02.

1. Turn on the power of the PC to which URS-02 has been already installed.

Then set WindowsCE Installer CD-ROM to the PC, and install

WindowsCE Service.  For more details on this step, please refer to your

WindowsCE Manual.

2. When installation is complete, the system prompts the user to connect the

two devices through a serial cable.  Use the serial cable that came with

the WindowsCE device to connect a hand-held PC to the computer. 

Note:

Be sure to use the serial cable that came with the hand-held PC.  If the

connector of the serial cable is the 9-pin type, please use the serial adapter

included in the package.

Appendix B

How to Attach URS-02 to a Windows CE  device

3. Click on the "Start" button.  The PC automatically scans its COM ports to

detect the port that leads to the WindowsCE PC.  As soon as a link is

established between the two PCs, the cable connection icon is displayed

on the task tray of task bar.  For more details on this step, please refer to

your  WindowsCE manual or user's guide that came with your hand-held

PC.

Note:

●

If a link is not established, please check whether 1)the COM port is set to

19,200 bps OR 2)its speed is equal to the speed set to the WindowsCE

PC.  A slow-down problem may occur if the speed is set to 38,400 bps or

greater. 

●

While there is a link between the PC and the hand-held PC, please do not

remove the USB cable connected to URS-02.  If you did remove the

cable, make sure to restart the PC.

●

Please do not remove the USB cable or the serial cable 1) during file

transfer and/or 2) while the two PCs are being synchronized.