Copyright Planika Sp. z o.o.
www.planikafires.com
IG0139#02
30.07.2018
41
WARNING!
To ensure correct functioning of the device, the following safety instructions must be strictly
observed:
Do not place additional imitative blocks or glowing wires on the burner or in the combustion
chamber other than those supplied with the device.
Decorative stones must be placed according to the description and photographic documentation.
Glowing wires should be used only in combination with decorative logs.
Ceramic logs should be placed according to the description and photographic documentation. No
other way of stacking logs is allowed other than the one indicated further in this manual.
Decorative stones must be placed according to the description and photographic documentation. The
Interior of the combustion chamber should be filled with all supplied decorative stones.
Make sure that the ionization and ignition electrodes as well as the space around them remained
free, so that no decorative element touches any of the electrodes.
Make sure that the gap between the burner and the tray surrounding the burner is not blocked by
any decorative elements.
Make sure to avoid spilling the powdery residue from the packaging during placing the vermiculite on
the burner.
5.11.1.
Arranging decorative logs
To properly arrange decorative logs on the burner you should:
Fill the burner with vermiculite that came with the device and spread it evenly over its entire surface,
remembering that vermiculite cannot reach above the edge of the burner. Uneven distribution of
vermiculite may adversely affect the image of the flame and the life of the burner.
WARNING!
The surface of the burner should be completely covered with vermiculite, in order not to
shorten the life of the burner.