Copyright Planika Sp. z o.o.
www.planikafires.com
IG0139#02
30.07.2018
6
Fireplace series MONROE should be monitored at least once a year in accordance with this installation
manual and as well as all applicable national and local regulations concerning safe installation and use
of gas appliances.
Make sure that the information on the nameplate are consistent with the local type of domestic gas
and pressure.
Do not change the structure of the device and its sealed components or modify the default settings of
the fireplace.
Do not place extra decorative accessories (other than those supplied with the unit) or the glowing coals
on the burner or in the combustion chamber.
The components of the control system with the gas valve cannot be exposed to moisture.
Carbon dioxide (CO2) or powder extinguisher must be placed near the unit.
Before connecting the device you should familiarize yourself with all connecting schemes (including
electric), set out in the manual.
The first time you turn on the fireplace MONROE, it is necessary to use it at the maximum level of the
flame for a few hours so that the elements warm themselves, and possible small residues of paints,
coatings and lubricants will evaporate.
During the first hours of use of the device, additional ventilation and ventilation of the room is
recommended, to quickly remove the characteristic smell fire resistant paint.
WARNING!
When you first start your device, the installer should perform the leak test on all gas
connections, check the connections of all elements of the system (including the proper connection to
the concentric air combustion system) and check the correct operation of all the items, in particular
system of ignition and flame failure protection system.
Do not move the device during its operation.
The surface of the fireplace series MONROE may strongly heat up during use - up to more than 100
°C .
WARNING!
Accessible parts of the devices, including the glass, can become very hot. You
absolutely must protect children from contact with the working device!
Do not operate the machine without inserting the front glass.
In case of failure of any of the glass panes, please contact your service provider or distributor.
The device should be installed away from flammable materials.
All metal parts of the fireplace series MONROE are constructed of materials resistant to rust or covered
with corrosion coating.
Never leave the fireplace MONROE unattended (as in the case of any other type of fireplace or fire in
the room). Fireplace series MONROE should be installed out of reach of children, unauthorized persons
and animals so direct contact with hot parts of the fireplace is not possible.
