Scanning Instructions:
1.
Power ON the SlimScan scanner.
2.
From scanner menu select “Scan” and
then select the folder where you want the
scanned image be saved.
3.
Hold the SlimScan on the document in
vertical position.
4.
Start rolling the scanner forward, keeping
it in same vertical position.
5.
Stop rolling the scanner when you reach
end of document.
6.
Wait for the scanner to save the image.
7.
Repeat steps 1 to 6 until all documents
are scanned.
8.
Connect the scanner to PC. The
Windows
Service
1
will post-process all your newly
scanned images and the scanner will be
shown as a removable USB drive.
For detailed instructions, please refer to the user
manual. This is on your SlimScan KCScan 100 disk
drive.
