Setting Up the Poly Medialign Single Display System
Poly, Inc.
13
To install the Medialign single display frame:
1
Install power, network, and any other connectivity outlets in the areas shown in the following
diagram.
Medialign Single System Connections Area
2
Attach the horizontal support rail and mount it at the proper height.
Warning:
Use appropriate mounting and anchoring hardware for the wall type. Failure to provide adequate
structural strength can result in damage to the equipment, voiding the warranty, and causing possible
serious personal injury. The installer is responsible for conforming to all applicable building codes and
local requirements.
Also, ensure that the wall does not have vibrations that could cause the mounted camera to shake,
more likely to be seen when the camera is zoomed in. You can feel the vibration in a wall by lightly
placing your hand on the wall.
306.75 mm
(12 1/16”)
613.5 mm
(24 1/8”)
347.2 mm
(13 5/8”)
Connections
9
Connections
9
Connections
296.03 mm
(11 5/8”)
306.75 mm
(12 1/16”)
Center
Line
197 mm (7 3/4”)
With 6” riser: 340 mm (13 3/8”)
With 12” riser: 466 mm (18 3/8”)
