Poly, Inc.
156
Appendix: Regulatory Information
Important Safeguards
Read and understand the following instructions before using the system:
●
Always disconnect the system from power before cleaning by removing the AC Mains plug from the
wall. If this is not accessible, the system can be disconnected by turning off the POWER
DISCONNECT switch installed in the room.
●
Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static
free cloth.
●
Do not place any liquids on the system.
●
Do not disassemble this system. To reduce the risk of shock and to maintain the warranty on the
system, a qualified technician must perform service or repair work.
●
Avoid using this system during an electrical storm. There may be a remote risk of electric shock from
lightning.
SAVE THESE INSTRUCTIONS
Ambient Temperature Guidelines
Operating temperature: 32 to 104ºF (0 to 40ºC)
System Rating
Note the location of the rating label on the codec bracket. Identify the installed version on the rating label.
100-240V AC 6A 50/60 Hz
The system is considered to be “pluggable equipment.”
EMERGENCY DISCONNECT
●
In the event of an emergency, power to the system may be disconnected by removing the AC Mains
plug from the wall.
●
If this is not accessible, the system can be disconnected by turning off the POWER DISCONNECT
switch installed in the room.
CAUTION:
See the instructions below for quick disconnect of the rack controller. Please disconnect
all before servicing.
