Setting Up the Poly Medialign Single Display System
Poly, Inc.
19
d
Place two horizontal frames between the V-rails. Orient them so that the faces with screw holes
are toward the floor and the vertical straps are up. One rail edge of each frame has small screw
holes and the other has large screw holes (circled in red in the next figure). Orient the top frame
with the large screw holes up (away from the wall). Orient the lower frame with the large screw
holes down (toward the wall). Attach the frames to the V-rails using four M10 × 25 mm screws per
frame.
e
Raise the frame assembly and lean it against the wall.
HORIZONTAL FRAME
2350-85976-001
FRAME V-RAIL
2350-85975-001
FRAME V-RAIL
2350-85975-001
(8) M10 X 25mm SCREW
1601-67617-002
HORIZONTAL FRAME
2350-85976-001
LARGE
SCREW HOLE
LARGE
SCREW HOLE
