Setting Up the Poly Medialign Dual Display System
Poly, Inc.
99
c
If using a riser kit, remove the leveling feet from the V-rails and install them in the risers. Screw
them in to the risers until the lower edges of the feet extend 34 mm (1 5/16”) beyond the end of
the riser. Slide the risers on the V-rails and attach them using two M6 × 12mm screws per riser.
(2) M6 x 12mm SCREW
1601-68586-001
34 mm (1 5/16 in)
