background image

Plantronics Savi User Guide

22

Help for Base Settings

Auto Answer

Auto answer saves the user a button press to establish the radio link between headset and base unit.
When auto answer is set to 

OFF

 you must press the headset call control button or base PC/desk phone 

talk button to answer an incoming call.*
When Auto Answer is set to 

ON

 an incoming call will be answered when the headset is removed from the 

charge cradle.*

Off

Default Line

Default line sets user preference for outbound desk phone or PC, when headset call control button is 
pressed.
When default line is set to desk phone and you press the headset call control button to initiate a call, the 
desk phone will be taken off-hook. You then need to dial the phone number from the desk phone.*
When default line is set to PC and you press the headset call control button an audio link will be brought 
up between your PC and headset. You then can place an outbound call via your soft phone application 
or listen to streaming audio via a media player.

Desk 
Phone

Over-the-Air 
Subscription

Over-the-air subscription allows a headset to be subscribed to the base without physically docking the 
headset. Required when conferencing various models of Plantronics Savi headsets.
When over-the-air subscription is set to ON you can subscribe a headset to your base without physically 
docking the headset into the charge cradle.
When over-the-air subscription is set to OFF you can only subscribe a headset to the base by physically 
docking the headset into the charge cradle.
For information on how to subscribe a master headset to the base see 

Subscribing a Master Headset

 

on page 15.
For information on how to temporarily subscribe guest headsets to the base for a conference call, see 

Conferencing in Up to Three Additional Headsets

 on page 15. 

On

Range**

Range can be minimized to help with desk phone/PC buzzing, improve user density, or restrict range 
of users.
When Range is set to HIGH a user will have up to 350

 

feet of range.

When Range is set to MEDIUM a user will have up to 150

 

feet of range. 

When Range is set to LOW a user will have up to 50

 

feet of range. 

High

Audio
Bandwidth**

The system will support both narrowband and wideband audio from the desk phone and PC. 
Wideband audio delivers heightened speech clarity and life-like fidelity. However, wideband audio 
consumes more battery power and has more stringent access criteria which reduces the number of 
systems that can be deployed in a small area. 
Your desk phone must support wideband audio to experience the benefit of selecting “wideband” for that 
device. All PCs support wideband audio.
When switching between narrowband and wideband audio, you must re-establish the audio link for the 
changes to take effect

Narrowband 
Desk Phone 
and PC

*Assumes use of lifter or EHS cable with desk phone and/or use of a softphone that is supported by PerSono Suite software.
 
** When bringing up a link from the base, the talk button will be solid yellow until a link is established. This could take up to several seconds 
especially for wideband audio and/or when in moderate to high density environments. If you press the talk button when the indicator light is 
yellow, it will terminate the search for an audio link.

Default 
Settings

Summary of Contents for Savi Office WO300





























Reviews: