INTRODUCTION
The Plasma Air Ceiling Scrubber is a complete air purification system integrating multilayer filtration, air purification,
sterilization and air ionization. The unit contains several technologies including a washable pre-filter, electrostatic
precipitator, UVC germicidal lamps and bipolar ion generator. The ceiling scrubber is manufactured from galvanized
steel with epoxy powder-coated outlet grilles and is designed for flush mounting in hung ceilings. The unit comes with
a three-speed fan operating at low sound levels and includes an IR remote control to turn the unit on and off, adjust
fan speeds, and turn the ionizer and UVC lamp on and off.
COMPONENTS - EXPLODED VIEW
MECHANICAL AND ELECTRICAL INSTALLATION
Mechanical: Four threaded holes (M6 size) are
provided in the top of unit to be used in conjunction
with the four factory provided eyebolts. Steel wires
or chains, by others, are necessary for final installation
into the underside of the concrete floor slab above.
Installing contractor may utilize threaded rod or other
hanging method as per authority having jurisdiction.
Unit should not be installed too close to exterior
doors as any drafts will interfere with unit airflow.
EYEBOLT
PEM NUT
WELDED
TO HOUSING
HOUSING
HOUSING
CHAIN OR
STEEL CABLE
HUNG CEILING
CONCRETE SLAB
Scrubber Installation Schematic
CEILING SCRUBBER
ENCLOSURE
UV RUBBER MOUNT
UVC LAMP
UV BALLAST
SAFETY SWITCH
INFRARED
REMOTE CONTROL
20"×12" WASHABLE
PREFILTER
ESP CHARGING WIRES (9)
ESP COLLECTION CELL
20"×12" CHARCOAL FILTER
(OPTIONAL)
FAN BLADE ASSEMBLY
120V AC MOTOR
MOTOR RUBBER MOUNTS
BIPOLAR IONIZER
POWER SUPPLY BOARD
TRANSFORMER
