PLASMON LMS - LD 8100 USER MANUAL
Page 38
Each Slide Assembly is composed of an Inner Slide Channel, Intermediate Slide Channel and an Outer
Slide Channel. The left and right slide assemblies are mirror images of each other, but care must be
exercised to ensure that both slide assemblies are properly oriented when installed into a rack.
The first step in the installation involves separating the left and right Inner Slide Channels from their
respective slide assemblies. The Inner Slide Channels are locked to the Intermediate Slide Channels by
the Slide Release Latch and the Inner Slide Release Button. The Slide Release Latch is located at the
front of the Inner Slide Channel and the Inner Slide Button is located on the inside of the Inner Slide
Channel.
Figure 21.
Separating the Inner Slide Channel from the Intermediate Slide Channel
1) Lift up the Slide Release Latch at the front of the Inner Slide Channels and pull the Inner
Slide Channels out until they stop.
2) Depress the Inner Slide Channel Release Buttons and then pull the Inner Slide Channels
out of the Intermediate Slide Channels.
INNER SLIDE CHANNEL
RELEASE BUTTON
SLIDE RELEASE
LEFT OUTER
LEFT INTERMEDIATE
SLIDE CHANNEL
LEFT INNER SLIDE
CHANNEL
SLIDE CHANNEL
LATCH
Summary of Contents for LD 8100
