Plastimo ECHOFISH 400, User Manual

7.3

 Your ECHOFISH 400 includes a combination

adapter, mounting bracket for the sonar sensor.

The adapter includes mounting taps so that you can

attach it to any flat surface, boat hull or appropriate

rod. The Adapter is removable and adjustable up to

180 Degrees.

6.7.3 Battery Alarm

(Setting Saved in Memory)

Select a setting from 1-5 to increase or decrease the

scroll speed, where 1 is the slowest and 5 is the

fastest chart speed.

Fish Icon,200 kHz,Narrow beam
Fish Icon,83 kHz,Wide beam
Raw Sonar

(Setting Saved in Memory)

Select a setting from 1through 5.

Select OFF for no Depth Alarm;

Select a number from 3-99' to set the alarm depth point

and turn it on.

An audible alarm sounds when the depth is equal to or

less than the setting.

6.7 Setup Menu

6.7.6 Bottom View

When you press POWER/MENU, the SETUP menu

will temporarily appear. Use the right and left arrow

keys to select the detail menu and press

POWER/MENU to enter the selected menu setting.

6.7.1 Contrast

(Setting Saved in Memory)

Select a setting from 1 through 5.

6.7.2  Scroll Speed

7.1 

 Pull out the rubber stopper and

adjust the float so that it is 18 to

25cm from the sensor. Replace the

rubber stopper by pressing it firmly

into the float. The Sensor float must

be adjusted so that it is a minimum

of 17cm inches away from the

sensor as per hereafter.

(Setting Saved in Memory)

BOTTOM VIEW selects the method used to

represent the bottom and structure on the display.

Structure displays weak

returns as light pixels and

strong returns as dark pixels.

This has the benefit of

ensuring that strong returns

will be clearly visible on the

display.

7.2

Gently lower the sonar sensor

and float assembly into water at your

desired fishing location.

When throwing, place the sonar

sensor and float in your hand, and

pitch underhand. Do not throw the

sensor by the cable as this will cause

unrepairable damage.

Before throwing, be certain that the

cable is free from tangles and is not

wrapped around anything.

Black (Bottom Black) displays

all pixels below the bottom

contour as black, regardless of

signal strength. This has the

benefit of providing a high

contrast between the bottom

and other sonar returns on the

display.

7 FIXING SONAR SENSOR

(Setting Saved in Memory)

Select OFF or 4.6 to 13.5 Volts. Battery Alarm

sounds when the input battery voltage is equal to or

less than the menu setting.

6.7.4 Units

6.7.5 Depth Alarm

(Setting Saved in Memory)

UNITS select the units of measure. (Feet/F,

Meters/C)

-3-