RR 14 EVO 2-400 HYBRID
‒
Check that there is enough space above, beside and under the basket when performing lifting, descent,
boom rotation or when using the telescopic function.
‒
Make sure that the operators of other aerial or ground machines are aware of the presence of the aerial
basket.
‒
Disconnect the tension from the airways of the machines in the area.
If necessary place obstacles on the ground.
‒
Do not push or pull the machine or other objects using the telescopic mechanism of the boom.
‒
Do not rest parts on the basket railing without the approval of the manufacturer.
‒
Never use the boom other than for moving personnel, their tools and equipment to the work position.
‒
Never exceed the rated capacities of the basket.
Consult the load diagrams shown in this manual.
‒
Place loads evenly on the floor of the basket.
‒
Never work with a machine in poor working condition.
‒
If there should be a break down, stop the machine, place a CLEARLY VISIBLE sign and advise the
personnel in charge.
‒
Sudden or erratic movements must not be done on the basket.
‒
The operator is prohibited to move between the basket and a structure outside the machine, machine
stability could be jeopardised.
‒
Personnel and equipment should only enter and exit the basket when the basket is on the ground and
the machine stowed.
‒
Never use ladders or steps, or similar objects on the basket or under the machine in order to obtain
additional reach for any reason.
‒
When moving about or working on the basket both feet must be firmly placed on the bottom of the
basket.
‒
Never use the arm to access or leave the basket.
‒
Should the machine show signs of any problems, all the personnel must leave the basket before
beginning to free the machine of any obstacles.
‒
To remove personnel in emergency conditions, only use the machines and tools provided for and
compliant with this purpose.
‒
The operator is responsible for preventing personnel on the ground from using the machine controls and
warning them not to work, walk or stop under the boom or the basket. Cordon off the machine at
ground level if necessary.
‒
When the machine is to be relocated, check that there are no people, holes, gutters, sudden changes in
ground level, obstructions, debris and covers that may hide holes or other hazards.
‒
Do not move the machine on gradients higher than those indicated in the technical specifi cations.
‒
The machine cannot be moved with the boom raised over the limit set by the machine’s logic.
‒
To prevent the machine from toppling over do not drive over soft or uneven surfaces.
‒
Do not drive the machine near to ditches, loading bays or other changes in ground level.
‒
When relocating the machine check that there are no obstructions around or above the machine while it
is in motion.
‒
Be aware of the machine’s stopping distances by taking into consideration all factors such as weight,
climate, efficiency, etc. in order to maintain the appropriate safety distances, from the surrounding
obstacles, during use.
‒
Where visibility is obstructed call for an assistant and use the acoustic warning signal.
‒
When the machine is moving, keep all non operative personnel at least
2 m
away.
‒
The basket operators must always be firmly fastened with the PPE provided in the corresponding points.
4.2. GENERAL PREPARATION
This section provides the personnel responsible for making the machine ready and for its entry in operation
with the information necessary and lists the checks that are to be done before operating the machine.
It is important that the information given in this section is read and understood before using the machine.
Ensure that all the necessary inspections have been done with positive outcomes before using the machine.
These procedures have the purpose of lengthening the working life of the machine and guaranteeing its
safety.
I
Caution
Since the manufacturer is unable to exercise any direct control over the inspections on the spot and
maintenance work, these activities fall under the exclusive responsibility of the owner and the operator.
English
42/150
Summary of Contents for RR 14 EVO 2-400 Hybrid
