RR 14 EVO 2-400 HYBRID
8. TRANSPORT
8.1. FOREWORD
The following chapter contains important prescriptions that must be strictly observed to protect personal
safety.
Always observe also all the general and specific regulations concerning lifting equipment and handling and
transport operations, including those that are not expressly stated in this manual.
I
Caution
The manufacturer’s technicians are not qualified to use the lifting equipment or to supervise the work of third
parties from a safety point of view.
The customer must therefore provide our technician with qualified personnel equipped with suitable lifting
means.
The manufacturer declines all liability related to the use of unsuitable lifting means.
8.2. SAFETY PRESCRIPTIONS FOR TRANSPORT AND HANDLING OPERATIONS
The transport, lifting and assembly operations must be carried out by specialised companies working in the
machinery transport sector;
It is only possible to perform the various operations in conditions of safety when suitable skills are combined
with the use of the correct equipment.
During lifting procedures:
‒
use the utmost caution;
‒
keep all persons clear of the area of operations;
‒
do not allow persons to walk or stand under or in the vicinity of suspended loads;
‒
lift loads to the indispensable minimum height;
‒
move loads close to the ground at low speed and taking care to avoid impacts and jolts;
‒
keep the manoeuvre area free of materials and clutter;
‒
to guide the load use sufficiently long poles or ropes so that there is no need to enter the danger area.
i
Danger
All personnel, including the operator, must remain at a safe distance.
The definition of a safe distance must take account of the situation of the greatest danger that may arise
during an exceptional event, such as breakage of a lifting chain or eyebolt with consequent tipping of the load.
No personal protection device exists able to protect against this event.
Always take account of this hazard and ensure that no one is in the vicinity of the area of manoeuvring or in
line with the direction of the ropes or chains.
While lifting and transporting the machine take due account of the size of the spaces available and the ground
characteristics.
I
Caution
Never climb onto the machine or parts of the machine, even if the machine is open and disconnected from the
energy sources.
Before starting lifting operations ensure you are wearing the following personal protective equipment (PPE)
‒
Protective helmet.
‒
Cut-resistant gloves.
‒
Accident-prevention footwear with slip-proof sole and reinforced toe-cap.
English
78/150
Summary of Contents for RR 14 EVO 2-400 Hybrid
