TECHNICAL SUPPORT: (909) 259-6001
BLSW1016
5
SAFETY INFORMATION
GENERAL SAFETY PRECAUTIONS WITH THE END-USER:
1. Instruct the end-user on how to safely operate all functions of the operator.
2. Instruct the end-user on how to safely use the Back-drive/ Emergency Release Options.
3. Clearly label and identify the circuit breaker for the operator and show the End-User the location of
the circuit breaker for the operator.
4. Thoroughly explain any and all warranties associated with the operator and installation.
5. These instructions must be kept for reference and forwarded to all possible future users of the sys-
tem.
6. Provide the End-User with the “Home Owner’s Manual Guide”.
7. The Manufacturer cannot be held responsible for possible damage caused by improper, erroneous or
unreasonable use.
8. $OOFOHDQLQJPDLQWHQDQFHRUUHSDLUZRUNPXVWEHFDUULHGRXWE\TXDOL¿HGSHUVRQQHO
9. Failure to comply with the above may create a situation of danger.
10. All installation, maintenance and repair work must be documented and made available to the user.
Signature:
Contact:
Date:
Installer:
11. When gate is moving, do not:
a. Allow any children to play near the moving gate.
b. Attempt to obstruct the moving gate.
c. Allow any one get close to the moving gate.
12. Keep remote control, or any other gate operator remote devices away from the children.
13. If operator breakdown, or mulfunction, please disconnect the operator from the main power source.
Do not attempt to repair, or intervene directly by any one except a qualify personnel.
IMPORTANT INSTALLATION INSTRUCTIONS BY UL STANDARDS:
1. Install the vehicular gate operator only when:
a. The gate operator is appropriate for the construction of the gate and the usage class of the
gate.
b. All exposed pinch points are eliminated or guarded.
2. The gate operator is intended for installation only on gates used for vehicles. Pedestrians must be
supplied a separate access opening.
a. The pedestrian access opening shall be designed to promote pedestrian usage. Locate the gate
such that persons will not come in contact with the vehicular gate during the entire path of travel of
the vehicular gate.
3. The gate must be installed in a location so that enough clearance is supplied between the gate and
adjacent structures when opening and closing to reduce the risk of entrapment. Swinging gates shall
not open into public access areas.
(CONTINUED ON NEXT PAGE...)
WARNING – To reduce the risk of severe injury or death to person, please to follow these instructions:
BLSW1016 Manual_Layout 1 5/8/2015 5:06 PM Page 5
