3
ENGLISH
4
ENGLISH
KNOW YOUR BOWL MIXER
A.
Turbo button
H. Main housing
B.
Speed control
I.
Bowl
C.
Ejection button
J.
Dough hook (as above arrow indicated)
D.
Main body
K. Dough hook (as above arrow indicated)
E.
Lock button
L.
Beater (as above arrow indicated)
F.
Stand lower housing
M. Beater (as above arrow indicated)
G.
Release button
C
B
F
I
J
K
L
M
USING YOUR BOWL MIXER
You must read all instructions carefully before using this appliance.
Remove all packaging material and please check carefully, making sure that your food mixer is
in good condition. It must have no cracks on the unit and no damage to the cord/plug.
Do not discard any packaging until all accessories have been found.
You must confirm that the voltage indicated on the food mixer corresponds with the voltage in
your home.
Remove any adhesive labels or stickers before use.
TO USE YOUR BOWL MIXER
Preparing the Dough Hooks or Beaters
Always check the mixer is switched off at the mains.
Inserting the Dough Hooks or Beaters
- Insert the two dough hooks (J & K) into corresponding holes, turn slightly until they engage.
- Insert the two beaters (L & M) into corresponding holes, turn slightly until they engage.
Never use Beaters and Dough Hooks together.
Using your Dough Hooks or Beaters
CAUTION:
Do not run this appliance for more than 3 minutes without interruption. Allow the
appliance break 30 minutes to cool down before continue operation.
Turbo button : for a short high-speed burst. Press and release for pulse action. The speed will
be increased to the maximum when the turbo button is pressed, then the appliance is operated
at max speed and the operation period shall not exceed 1 minute at this speed.
Speed control (total 5 speeds) : 0: stop / 1: slow / … / 5: fastest
To remove Dough Hooks or Beaters
To detach Dough Hooks / Beaters, press the Ejection Button.
Notes :
The Ejection Button will not work if the speed is not at “0” position.
Short-time operation
The appliance is designed to process average domestic quantities of food, it can be operated
without interruption for a maximum of 3 minutes, then it should be allowed break 30 minutes to
cool down before continue operation.
A
D
E
G
H