CHARGING
Instruction Manual
by: Wise Innovation Technologies
©
2016 Wise Innovation Technologies, Inc.
[09]
The user can opt to charge the battery while the battery is
inside the frame or while the battery is removed from the frame.
Connect the charger to the wall socket. (100-240V)
WHILE BATTERY IS IN FRAME
Using the tab as leverage, use a finger to pull upward on the
rubber charging port protector, exposing the charging port.
REMOVING BATTERY FROM FRAME
Fold the bike using the instructions on Page 6. Insert the key
into the key insertion point. Turn the key counterclockwise two
clicks, then place one hand on the battery that is exposed at the
frame's fold. Remove the key, making sure to hold the battery in
place until ready to slide the battery out of the frame. Use the
folding handle on the battery to help guide the battery out of
the frame. Lay battery on its side to prevent it from falling.
CONNECTING THE CHARGER TO THE BATERY
After the charger is inserted into the wall socket, the LED
indicator light should be green. Insert the charger into the
battery. The LED light should turn red if the battery does in fact
need to be charged. It will stay green, otherwise. Once the
battery is fully charged, the light will turn green. Unplug the
charger and be on your way to more adventures on your 3OND!
Neutral (when not plugged into
bike battery)/Fully charged
Charging
LED INDICATOR LIGHT
CHARGING PORT PROTECTOR
V
U
U
V
