BEFORE YOU RIDE
Instruction Manual
by: Wise Innovation Technologies
Before you ride your bike for the first time, please make absolutely certain that
it has been correctly assembled. You can do this either by taking it to your
nearest bicycle shop, or if you are proficient in bicycle mechanics, you can do
the inspection yourself. You must make certain that the pedals, saddle,
handlebars and any self-assembly items have been correctly fitted. Check all
other nuts and bolts and fixings are properly tightened, paying particular
attention to the motor fixings, kick stand, and steering head bearings. Check
that reflectors and lights are functioning properly. Make sure the battery is
fully charged by checking the indicators on the LCD screen.
NEVER drink alcohol and ride your electric bike. The use of alcohol greatly
reduces reflexes and limits your ability to ride safely.
Check to make sure that all of the following components are contained within the
box of your new 3OND.
TIRE PRESSURE
Remove the valve cap by turning it counter-clockwise.
Using a tire gauge, check that both tire pressures are
between 35 to 45 psi/2.4 to 3.1 bar.
BRAKES
Press the front brake, then move the bicycle forward. If
the brake does not stop the bike smoothly, but firmly,
adjust the cables of the brake levers. Do the same for the
rear brake.
SADDLE, AND HANDLEBAR
Adjust the saddle to the desired height by pulling the
quick release lever outward, then moving the seat post up
or down. Squeeze the lever back down. Put some pressure
on the saddle with your hands. If there is slippage, release
the lever and turn it clockwise, then close the lever.
FORK
Adjust the knobs at the top of the fork to get the desired
pressure.
©
2016 Wise Innovation Technologies, Inc.
[05]
Platinum e-BIKES 3OND folding bicycle
Left and right pedals
Bicycle saddle
Charger and power cord
Lock keys for the battery (2)
Battery within the frame
√
√
√
√
√
√
