Platinum Tunturi, User Manual

4

Owner

’s manual 

•

 PLA

TINUM PRO

Circuit breakers

Some circuit breakers used in homes 

are not rated for high inrush currents 

that can occur when a treadmill is first 

turned on or even during normal use. 

If your treadmill is tripping the circuit 

breaker (even though it is the proper 

current rating and the treadmill is the 

only appliance on the circuit) but the 

circuit breaker on the treadmill itself does 

not trip, you will need to replace the 

breaker with a high inrush type. This is 

not a warranty defect. This is a condition 

we as a manufacture have no ability to 

control. This part is available through 

most electrical supply stores

Grounding Instructions

This product must be grounded. If the 

treadmill’s electrical system should 

malfunction or breakdown grounding 

provides a path of least resistance for 

electric current, reducing the risk of 

electric shock. This product is equipped 

with a cord having an equipment-

grounding plug. The plug must be 

plugged into an appropriate outlet that 

is properly installed and grounded in 

accordance with all local codes and 

ordinances. 

NOTE:

Improper connection of the equipment-

grounding conductor can result in a risk 

of electric shock. Check with a  

qualified electrician or serviceman if 

you are in doubt as to whether the 

product is properly grounded. Do not 

modify the plug provided with the 

product if it will not fit the outlet; have 

a proper outlet installed by a qualified 

electrician.

•  Do not use outdoors.

•  Do not use excessive pressure 

on console control keys. They are 

precision set to properly function with 

little finger pressure. Pushing harder 

is not going to make the unit go faster 

or slower. If you feel the buttons are 

not functioning properly with normal 

pressure, contact your dealer.

SAVE THIS INSTRUCTION MANUAL

Important Electrical Information

NOTE:

NEVER use a RCD - Residual Current 

Device (U.S. ver.= GFCI) - wall 

outlet with this treadmill. As with any 

appliance with a large motor, the RCD/

GFCI will trip often. Route the power 

mains cord away from any moving part 

of the treadmill including the elevation 

mechanism and transport wheels.

NOTE:

NEVER remove any cover without first 

disconnecting AC power. If voltage 

varies by ten percent (10%) or more, 

the performance of your treadmill may 

be affected. Such conditions are not 

covered under your warranty. If you 

suspect the voltage is low, contact your 

local power company or a licensed 

electrician for proper testing.

NOTE: 

NEVER expose this treadmill to rain 

or moisture. This product is NOT 

designed for use outdoors, near 

a pool or spa, or in any other high 

humidity environment. The temperature 

specification is 40 degrees c, and 

humidity is 95%, non condensing (no 

water drops forming on surfaces).