background image

PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION IS REQUIRED. 

Always keep child in view when child is in vehicle. 

• This toy should be used with caution since skill is required to avoid falls or 

collisions causing injury to the user or third parties.

• Protective equipment should be worn.
• Never use in roadways, near cars, on or near steep inclines or steps, 

swimming pools or other bodies of water. 

• Always wear shoes.
• Always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children under 37 months due to its maximum 

speed; Maximum user weight is 40 kgs.

• This toy has no brake.

Rules for Safe Riding

• This vehicle has adjustable play seat belts. Please instruct children how to tie the 

safety belt before using, guarantee the security.

• Keep Children within Safe Riding Areas:
  - Never use in roadway, near motor vehicles, on lawn space, on or near steep 

inclines or steps,  swimming pools or other bodies of water;

• Use the toy only on flat surfaces. Such as garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have 

an accident. Operate the  vehicle only in the daytime or a well-lit area.

• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• Do not let any child touch the wheels or be near them when the car is moving .

WARNING!

Use the vehicle on generally level ground ONLY!

DO NOT Use the vehicle on Lawn space!

Saftely  

  17

Summary of Contents for JEEP WRANGLER



























Reviews: