background image

 Non-rechargeable batteries are not to be recharged.

 If removable rechargeable batteries are used, the are only to be charged under adult 

supervision.

 Remove rechargeable batteries from the product before charging.

 Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard 

(carbon-zinc) or rechargeable (nickel-cadmium). 

 Insert batteries as indicated inside the battery compartment, anode to andoe, cathode to 

cathode.

 Remove batteries during long periods of non-use. Always remove exhausted batteries from the 

product. Battery leakage and corrosion can damage this product. Dispose of batteries safely. 

 Never short circuit the battery terminals.

BATTERY INFORMATION

Before You Begin Assembly   

  4

FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND 

ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.

•  

ADULT ASSEMBLY REQUIRED

. The product contains small parts, which are for 

adult assembly only. Keep children away when assembling.
•  Always remove protective material and poly bags and dispose before assembly.

• Make sure that the power switch is 

turned “OFF”

 before assembling the ride-

on.

• Before first time use, charge the battery for at least 4 to 6 hours.
• Assembly tools required:

WARNING!

Screwdriver

(not included)

Long nose pliers

(not included)

Spanner

Summary of Contents for JEEP WRANGLER



























Reviews: