For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
36" SINGLE SLIDE
Rev D
7/18/2009
1701-3
Page 3 of 4
3/8" Lock
Deck
Button Head Bolt
3/8" x 1-3/4"
Nut
3/8" x 1" O.D.
Washer
36" SINGLE
SLIDE
Figure 1.2
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
Plumb and level entire component. Pour concrete
into footing hole. Allow at least 72 hours to cure
before using this equipment. (See Note B and E)
Step 7
Place appropriate compliant protective surfacing
under and around 36" Single Slide. (See Note D)
Step 2
Attach the Slide Sit Down Wall to the deck and posts.
(See Note C)
Step 3
Attach the Single Slide Leg to the 36" Single Slide as
shown in Figure 1.1. (See Note A)
Step 4
Place the 36" Single Slide in the footing hole and attach
to the deck as shown in Figure 1.2. (See Note A)
3/8" x 1" O.D.
SLIDE
36" SINGLE
SLIDE LEG
SINGLE
Washer
3/8 x 3/4"
Hex Bolt
Figure 1.1
