IMPORTANT NOTES: Read First
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
BOARDWALK CURVED 90°
INSTALLATION INSTRUCTIONS
Rev B
8/19/2019
PC-2430(1965)
Page 1 of 4
See Footing Detail
Figure 1.1
Figure 1.2
(A)
Use liquid thread lock (such as Loctite
®
) with all threaded hardware.
Important:
Liquid thread lock (prior
to curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving
as a lubricant during assembly.
(B)
Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must
be allowed to cure completely before using the equipment (at least 72 hours).
(C)
According to safety guidelines, the top surface of the treads shall be no greater than the following heights
above the protective surfacing: Ages 2-5: 12" [304mm], Ages 5-12: 16" [406mm].
(D)
An appropriate energy absorbing safety surface is required under and around all playground equipment.
Loose fill protective surfacing is shown only as an example for the purpose of this assembly instruction. Other
surfacing material may vary in thickness and/or compression depths. See free publication - The Handbook for
Public Playground Safety, Publication #325 at www.cpsc.gov for the surfacing appropriate for the fall height
of the equipment or consult your surfacing supply representative.
FIGURE 1
Boardwalk Curved 90°
