www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
PC-2430(1965)
Page 2 of 4
Rev B
8/19/2019
BOARDWALK CURVED 90°
INSTALLATION INSTRUCTIONS
A
A
12"
305mm
(See Note C)
12"
305mm
27"
686mm
*
18"
457mm
LOOSE FILL SURFACING MATERIAL SHOWN:
9" compressed or 12" uncompressed depth.
Compressed depth shown. (See Note D)
2b Stone, drain rock
Footing Anchor
Blocking, see
Installers Manual
Concrete Footing
Undisturbed Soil
Optional Filter Fabric over
Pea Gravel (for drainage)
(Finish Grade)
(Top of Soil)
Footing Detail
39
1
2
"
1004mm
16
3
8
"
416mm
72"
1829mm
Refer to current ASTM 1487 standards.
The Use Zone for Stationary Play equipment shall
be no less than 72" [1829mm] in all directions
from the perimeter of the play structure.
Step 1
Refer to Footing Layout and mark footing hole
locations. Dig (3) Ø 12" footing holes. Refer to Footing
Detail for depth and details.
IMPORTANT:
For areas with soft soil conditions,
larger footings may be required.
* Footing depth must be adjusted to compensate for
the depth/thickness requirements of selected safety
surfacing. See Section 06.1 of the Installation Manual.
Top View - Footing Layout
72" [1829mm] Use Zone Recommended