For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
EASY ACCESS STAIRS 24"
INSTALLATION INSTRUCTIONS
Rev C
1/19/2017
1201-2
Page 3 of 4
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
Plumb and level entire component. Pour concrete
into footing hole(s). Allow at least 72 hours to
cure before using this equipment. (See Note B)
Step 7
Place required protective surfacing under and
around Easy Access Stairs. (See Note D)
Step 2
Place Transfer Rails into footing holes and attach
to collars as shown in figure 1.1 (See Note C)
Step 3
Attach ADA Steps to Transfer Rails as shown
in Figure 1.2. (See Note A)
Step 4
Attach ADA Steps to deck as shown in Figure 2.
(See Note A)
FIGURE 2
3/8" Lock Nut
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Washer
3/8" x 1-1/2"
Button Head Bolt
ADA STEPS
TRANSFER
STATION H. RAIL 36
Figure 1.1
3/8" Lock
Nut
3/8" x 1" O.D.
Washer
TRANSFER STATION
H. RAIL 36
3/8" x 2-3/4"
Button Head Bolt
ADA STEPS
Figure 1.2
