Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
GYRO-POD SPINNER RV
INSTALLATION INSTRUCTIONS
Rev B
1/5/2017
RV-1974
Page 8 of 8
Maintenance
Specifications
Maintenance Manual.
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Parts List
GYRO-POD LEG:
Shall be fabricated using 2.375" O.D. 10 gauge
steel tubing with welded 1/4" x 1-1/2" flat steel
reinforcement plates and stainless steel ball
bearing. The Gyro-Pod Leg shall have a multi-
stage baked-on powder coat finish.
GYRO-POD TOP FRAME:
Shall be fabricated using 2.375" O.D. 11 gauge
steel tubing with welded 1.900" O.D. 11 gauge
steel supports, 1/4" thick stainless steel mounting
brackets and stainless steel ball bearing. The
Gyro-Pod Top Frame shall have a multi-stage
baked-on powder coat finish.
GYRO-POD BEARING HUB:
Shall be fabricated using 2-1/4" O.D. machined
steel hub with welded 1/4" thick steel plate. The
Gyro-Pod Bearing Hub shall have a multi-stage
baked-on powder coat finish.
GYRO-POD HANDRAIL:
Shall be fabricated using 1.315" O.D. 12 gauge
steel tubing with welded 1/4" thick steel mounting
plates. The Gyro-Pod Handrail shall have a multi-
stage baked-on powder coat finish.
GYRO-POD TREAD PLATE:
Shall be made from punched 14 gauge sheet steel.
The Gyro-Pod Tread Plate shall be Play-Tuff™
coated after fabrication.
GYRO-POD RING PLATE:
Shall be made from precision cut 1/4" thick sheet
steel. The Gyro-Pod Ring Plate shall have a multi-
stage baked-on powder coat finish.
GYRO-POD END & RING:
Shall be constructed of UV-stabilized, rotationally
molded, linear, low density polyethylene with an
average wall thickness of .250".
GYRO-POD RING SPACER:
Shall be machined from high strength aluminum
alloy. The Gyro-Pod Ring Spacer shall have a
multi-stage baked-on powder coat finish.
BALL JOINT SOCKET HALF:
Shall be made from Ultra High Molecular Weight
Polyethylene for lasting durability and minimal
rotational resistance.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Part #
DESCRIPTION
QTY.
AE-0789
Gyro-Pod Tread Plate
1
AE-0790
Gyro-Pod Ring Plate
1
DE-0072
Gyro-Pod End
2
DE-0073
Gyro-Pod Ring
1
FS-1974-HND
Gyro-Pod Handrail
6
FS-1974-HUB
Gyro-Pod Bearing Hub
2
FS-1974-LEG
Gyro-Pod Leg
1
IE-0083
Gyro-Pod Ring Spacer
3
IH-0001
Ball Joint Socket Half
4
372003
Gyro-Pod Spinner Warning Label
1
4-9339042
Washer Flat 3/8" x 7/8" O.D. x .100" Thick
8
9103032-TR
Bolt Button Head 3/8" x 3/4"
12
9103052-TR
Bolt Button Head 3/8" x 1"
14
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
6
9103072-TR
Bolt Button Head 3/8" x 1-1/2"
6
9103082-TR
Bolt Button Head 3/8" x 1-3/4"
6
9123231
Bolt Hex 3/8" x 5-1/2"
1
9143112-TR
Bolt Shoulder 3/8" x 2-1/2" BH
2
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
48
9345002
Washer Flat SAE 1/2"
10
9413002
Nut Lock 3/8"
12
9443092-TR
Nut Barrel 3/8" x 2" BH
8
9483602
Nut Hex 3/8"
1
Part #
DESCRIPTION
QTY.
Varies
Gyro-Pod Top Frame RV
1
9380130
Washer Rubber AR 1" x 3" O.D.
1
Assembled Parts List
